Static Addressing - Xerox DocuPrint C55 Install Manual

Static Addressing

62
The printer is assigned a TCP/IP address by a network
administrator and this address is manually input to the
printer. Perform the steps below:
1. Press the On Line button on the Control Panel. Be
sure the light next to it is OFF.
2. Press the Menu button. The ON-LINE message
disappears and TOP MENU is displayed.
3. Press Next until <COMMUNICATIONS> appears on
the Display Panel and then press Enter.
4. Press Next until <NETWORK SETUP> is displayed
and then press Enter.
5. Press Next until <TCP/IP> is displayed and then
press Enter.
6. Press Enter while <IP ADDRESS> is displayed.
7. Press Enter while <DYNAMIC> is displayed.
8. Press Next until <NO> is displayed and then press
Enter.
9. Press Enter while <SET IP ADDRESS> is
displayed.
10. Press Next to increase the digit value. Press
Previous to decrease the digit value. When each
digit is correct, press the Next button to move on to
the next digit.
11. The Next button wraps around the display without
setting the value if an error is made. After the
complete IP address is displayed correctly, press
Enter. The IP address is now set.
12. Reset the Printer to have the new settings take effect.
Q U I C K N E T W O R K I N S T A L L G U I D E