Static Addressing - Xerox DocuPrint N2025 Install Manual

Appendix B: Set an IP Address
52 Quick Network Install Guide

Static Addressing

Windows 95/98
1
Open an MS-DOS session.
2
Ping a known IP address on the network. (Type "ping
x.x.x.x" where x.x.x.x is the IP address of a device on the
network.)
NOTE: This step is required.
3
Create a static ARP entry by typing the following
command:
arp –s x.x.x.x aa-aa-aa-aa-aa-aa <CR>
where x.x.x.x is the IP address you are assigning to the
CentreDirect External Print Server (External Ethernet
Adapter)
and aa-aa-aa-aa-aa-aa is the Ethernet address of
CentreDirect External Print Server (External
the
Ethernet Adapter)
4
Type arp –a <CR>. A list should appear that shows the
host that was pinged and the new entry.
5
Type Telnet x.x.x.x <CR>.
6
When the telnet window appears, enter ! and then yes to
enter monitor mode.
7
Type I to enter the IP address. Enter the desired IP address.
CentreDirect External Print Server (External
8
Reboot the
Ethernet Adapter)
.
by typing R.