Xerox DocuPrint 75 Supplementary Manual page 36

To view or change the properties of a job, place the
cursor over the desired job and press the right mouse
button. A pull-down menu is displayed. Select
Properties. Or, as a short cut, simply double click the left
mouse button on the selected job and the Properties
screen is displayed.
If the job is faulted or ineligible, the Faulted or Resources
Required tabs are the default displays respectively,
reducing the amount of navigation required.
32 Xerox DocuTech 75/90 and DocuPrint 75/90
DocuSP 2.1 to 3.6 Differences Document