Tape Client
Xerox DocuTech 75/90 and DocuPrint 75/90
DocuSP 2.1 to 3.6 Differences Document
The Tape Client software enables transmission of data from a
cartridge or open reel tape to the DT/DP 75/90 controller via the
Socket Gateway. The Socket Gateway must be set up to interact
with the Tape Client software. Refer to the online help for
information on Socket Gateway installation and setup.
To interact with the Tape Client software, open the Tape Client
window on the DocuSP interface by selecting Tape Client...
from the System pull-down menu. All Tape Client functions are
accessed through this window.
63