42
Caveats for using Layout
·
Job programming is applied after the pages are imposed.
These settings include Sides Imaged, Collation, Image Shift,
and Quantity. It is possible to program settings that create a
conflict with the layout settings. This may produce
unexpected or incorrect results when the images are
imposed. For instance, if you remove collation on a set of
prints you wish to impose as saddle signature, you will get N
copies of each page next to each other instead of 1-N, 1-N,
1-N, etc.
This may create problems when the signature booklet is sent
to the Signature Booklet Maker.
·
All special page programming, such as inserts, covers, and
page exceptions, will be ignored when using the Layout
feature.
·
The Layout feature is valid only for PostScript and PDF print
jobs and for jobs submitted to a spooling queue. Any page-
level PostScript programming in the PDL will also be ignored
when the job is printing.
Xerox DocuTech 75/90 and DocuPrint 75/90
DocuSP 2.1 to 3.6 Differences Document