Xerox DocuPrint 65 Operator's Manual page 67

Operator Guide
DocuTech 65/DocuPrint 65
Table 3-6. Recommendations for loading special stock
Stock Type Common Use
GBC stock Plastic comb or
(Sameceda) strap binding via
slotted holes or
rectangles at
frequent intervals
along the long
edge (the bind
edge)
Paper and other stock
Recommendation
• Load with slotted holes
inboard; for example, load
SEF when the holes are down
the long edge.
• Loading with holes on the
lead-edge (LEF) or the trail-
edge (LEF) is not supported,
but may work well for some
stock depending upon the size
and number of the holes and
how they affect the sensors in
the printer; therefore, if you
intend to use LEF you should
run a sample of the stock to
confirm its acceptability before
running the job.
3-11