Jams During Automatic 2-Sided Printing; Print-Quality Problems; Controlling Print Quality - Xerox VersaaLink B600 User Manual

Probable Causes
One of the printer doors is open.

Jams During Automatic 2-Sided Printing

Probable Causes
Using paper of the wrong size, thickness, or type.
Paper is loaded in the wrong tray.
Tray is loaded with mixed paper.

Print-Quality Problems

Your printer is designed to produce consistently high-quality prints. If you observe print-quality problems,
use the information in this section to troubleshoot the problem. For more information, go to
www.xerox.com/office/VLB600_VLB610support.
Caution
The Xerox Warranty, Service Agreement, or Xerox Total Satisfaction Guarantee does not cover damage
caused by using unsupported paper or specialty media. The Xerox Total Satisfaction Guarantee is
available in the United States and Canada. Coverage could vary outside these areas. Contact your local
Xerox representative for details.
Note
To ensure consistent print quality, the toner, print, and drum cartridge for many devices are designed
to cease functioning at a predetermined point.

Controlling Print Quality

Various factors can affect the quality of the output of your printer. For consistent and optimum print
quality, use paper designed for your printer, and correctly set the Print-Quality Mode. Follow the guidelines
in this section to maintain optimum print quality from your printer.
Temperature and humidity affect the quality of the printed output. The range for optimal print quality
is 15–28ºC (59–82ºF) and 20–70% relative humidity. However, print quality can be affected when
operating near the limits for both temperature and humidity.
® ®
Xerox VersaaLink B600/B610 Printer
User Guide
Solutions
Check the doors on the printer. Close any door that is
open.
Solutions
Use paper of the correct size, thickness, or type. For more
information, refer to Supported Paper Types and
Weights for Automatic 2-Sided
Ensure that paper is loaded into the correct tray. For
more information, refer to
Load the tray with only one type and size of paper.
Troubleshooting
Printing.
Supported Paper.
8-17