Changing The Tray 6 Settings - Xerox DocuPrint 65 Operator's Manual

Operator Guide

Changing the Tray 6 settings

Rear Guide
Front Guide
DocuTech 65/DocuPrint 65
You can set Tray 6 to hold either A4 or 8.5 x 11 inch paper.
An example of changing the tray setting from 8.5 x 11 inches to A4 is shown in
Figure 1-8.
Figure 1-8. Changing the guides from 8.5 x 11 inches to A4
Starting with the Rear Guide, you will adjust the guide to the A4 position.
Perform the following:
1. Slide the black latch down to release the guide.
2. Move the guide out, over, and in, into the A4 position.
3. Slide the latch up to lock the guide.
Repeat the procedure for the front guide
NOTE: Be sure to reprogram the tray in the Printer Manager to reflect the
changed size.
Product overview
1-9