Xerox DocuPrint 65 Operator's Manual page 32

Product overview
1-8
NOTE: For information about how to load specific types of paper or other
stock, refer to the chapter, Paper and other stock.
Loading paper in the Bypass Tray (Tray 5)
Insert paper as shown. The Bypass Tray extends to accommodate paper that
is physically longer than the tray. Simply pull out the extension bar. Do not
load paper above the maximum fill line.
Loading paper in the High Capacity Feeder (Tray 6)
To load paper, open the cover and wait for the tray to lower. When the paper
has been loaded, close the cover to raise the tray. The High Capacity Feeder
is shown in Figure 1-7.
Figure 1-7. Loading Trays 5 and 6
Insert paper for the
Bypass Tray here.
Pull the Extension
Bar to extend the
Bypass Tray
Insert paper for the
High Capacity Feed
Tray here
DocuTech 65/DocuPrint 65
Operator Guide