Adding A Dfa Profile - Xerox DocuPrint 180 System Configuration Manual
Xerox docuprint 180: user guide
Hide thumbs
Also See for DocuPrint 180:
- Message manual (356 pages) ,
- Configuration manual (276 pages) ,
- Product manual (118 pages)
Table of Contents
Advertisement
SETTING THE SYSTEM CONFIGURATION
Adding a DFA profile
4-58
The values you enter for a DFA profile are provided by the vendor of
your finishing equipment, except the Set Media Modification (SMM)
values for Finishing Functions 1 and 2 (if used). The SMM values are
specified in the job by your applications programmer.
To create a new DFA profile:
1. Locate the DFA Profile pull-down menu on the IPS main window
(below the Output Configuration pull-down menu).
Figure 4-46. DFA Profile pull-down menu
Note: The DFA Profile menu displays only if you have DFA
enabled on your IPS.
2. From the DFA Profile pull-down menu, select any name to use
as a base for the new profile. (You will rename the new file, so
the existing file you selected to build from will not be changed.)
Figure 4-47. DFA Profile Name pull-down menu
3. On the Output DFA Profile window, specify the configuration
settings for the new output DFA profile.
XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Advertisement
Table of Contents
