Enabling Or Disabling The Modem - Xerox DocuPrint 180 System Configuration Manual
Xerox docuprint 180: user guide
Hide thumbs
Also See for DocuPrint 180:
- Message manual (356 pages) ,
- Configuration manual (276 pages) ,
- Product manual (118 pages)
Table of Contents
Advertisement
SETTING UP THE PRINTER CONTROLLER
Enabling or disabling the modem
3-6
Your service representative may install a modem in your system for
diagnostic purposes. This modem is used for dial-in servicing and
diagnostics when needed by your service representative.
To enable or disable the modem, follow these steps:
1. Select Modem Enable/Disable from the Configuration pull-down
menu. The Modem Enable/Disable window displays.
Figure 3-5.
2. Click Enabled or Disabled, as appropriate.
3. To allow Shell access to a service representative, mark the
"Remote Shell Access" checkbox.
4. Click Apply. The Modem Enable window displays, prompting
you for a password.
5. Enter the root password.
Note: The modem will automatically be disabled after rebooting the
system.
XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Modem Enable/Disable window
Advertisement
Table of Contents
