Xerox DocuPrint 180 System Configuration Manual page 34

INTRODUCTION TO THE GRAPHICAL USER INTERFACE
1-22
The figure below shows one of the windows that contain the Quit and
Apply buttons.
Figure 1-20. Window with Quit and Apply buttons
Reset On the Create a new Media Type and Edit a Media Type windows,
restores the attribute settings displayed on the window to the system
defaults.
If selected after you have input changes to a previously saved media
icon, restores the icon's original saved attributes.
Clear On the Output DFA windows, signals the printer to disable the
selected DFA profile name. Resets all profile parameters in printer
memory to zero. You would use this button, for example, if you were
going to remove or take offline your third-party feeding or finishing
equipment.
Save Saves changes you make to an existing file, such as an output
configuration. Also saves new configuration and DFA personality
profile files you create, after you type the new file name in the Ask For
File Name window.
Update Saves changes made to an input or output configuration file, but does
not put that configuration into effect (followed by a confirmation
prompt).
XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM