Xerox DocuPrint 180 System Configuration Manual page 113

Specifying finishing attributes
(for systems with DFA)
XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
To specify finishing attributes, follow these steps:
1. On the Output Configuration window, check the "Finishing" box,
then click the Finishing Attributes button. The Finishing
Attributes window displays.
Figure 4-44. Finishing Attributes window (systems with DFA)
2. On the Finishing Attributes window, make selections or enter
values in the fields described below.
•
Set Sheet Delivery — Specifies whether sheets will be
delivered Face Up or Face Down.
•
Page Order within Set — Specifies the order in which
pages in a set will be delivered to the output bin: first-to-last
or last-to-first.
— 1 to N — Output sheets are delivered to the output bin
in ascending order (the first page is delivered first).
— N to 1 — Output sheets are delivered to the output bin
in descending order (the last page is delivered first).
SETTING THE SYSTEM CONFIGURATION
4-55