Table of Contents
Advertisement
information@ITM.com
8 Tips and assistance
8
Tips and assistance
8.1.
Questions and answers
Question
Possible causes / solution
FULL
appears in the
Insufficient memory capacity on
display, the red LED
SD card to save the data.
flashes twice,
out
> Remove the SD card, free up
appears in the display.
Err
appears in the
An error occurred while saving
display, the red LED
data to the SD card.
flashes twice,
out
> Remove the SD card, free up
appears in the display.
nO dAtA
appears in
The logger has not yet recorded
the display, the red
any data and is in Wait mode.
LED flashes twice.
> Remove the SD card and
rST
appears in the
The battery was changed. No
display.
data are recorded.
> Reprogram the data logger
- - - -
Sensor of data logger defective.
appears in the display.
> Contact your dealer or the
Testo-Direct
www.
more memory space and
copy data.
more memory space and
copy data.
wait until the logger is in Rec
mode.
via the software.
Testo Customer Service.
55
.ca
1.800.561.8187
Advertisement
Table of Contents
