Table of Contents
Advertisement
information@ITM.com
5 Display and control elements
Representation Explanation
Green and
Instrument is in End-mode
yellow LED flash
three times
when pressing
the button.
Green LED
Instrument is in Wait-mode
flashes three
times when
pressing the
button
Green LED
Long pressing of the GO button has
flashes five
set a time mark.
times when
pressing the
button
Green, yellow
The battery has been changed.
and red LED
flash in
succession
5.3.
Key functions
A detailed representation of the display readings can be
found under Menu overview.
✓ Instrument in operating status
Button start programmed.
> Press
[GO]
for approx. 3 seconds to start the
measurement program.
-
The measurement program starts and
the display.
✓ Instrument is in operating status Wait:
> Press
[GO]
in order to change between displays of
upper alarm value, lower alarm value, battery life and
last reading.
The displays appear in the specified sequence.
✓ Instrument is in operating status
> Press
[GO]
in order to change between displays of
highest saved reading, lowest saved reading, upper
alarm value, lower alarm value, battery life and last
reading.
Testo-Direct
www.
Wait
and start criterion
Rec
appears in
Rec
or End:
45
.ca
1.800.561.8187
Advertisement
Table of Contents
