Table of Contents
Advertisement
information@ITM.com
6 Using the product
6.4.
Mounting the wall bracket
The scope of delivery does not include mounting
materials (e.g. screws, wall plugs).
✓ The data logger has been removed from the wall
bracket.
1. Position the wall bracket at the desired place.
2. Use a pen or something similar to mark the location for
the fastening screws.
3. Prepare the fastening location in accordance with the
fastening material (e.g. drill hole, insert wall plugs).
4. Fasten the wall bracket with suitable screws.
6.5.
Securing the data logger
✓ The wall bracket has been mounted.
1. Slide the data logger into the wall bracket (1).
2. Push the locking pin (2) through the holes in the wall
bracket.
3. Fasten the lock (3) on the locking pin.
4. Pull off the key (4).
6.6.
Reading out measurement data
The measurement data remain stored in the data
logger after they have been read out and can
therefore be read out several times. The
measurement data will only be deleted when the
data logger is reprogrammed.
Testo-Direct
www.
51
1.800.561.8187
.ca
Advertisement
Table of Contents
