NCR 7358-K404 Kit Instructions
  1. Manuals
  2. Brands
  3. NCR Manuals
  4. Racks & Stands
  5. 7358-K404
  6. Kit instructions

NCR 7358-K404 Kit Instructions

Mx915 pin pad mount - sp1
Hide thumbs

Advertisement

Table of Contents

Kit Instructions
MX915 PIN Pad Mount - SP1
7358-K404
Issue A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 7358-K404 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NCR 7358-K404

Summary of Contents for NCR 7358-K404

  • Page 1 Kit Instructions MX915 PIN Pad Mount - SP1 7358-K404 Issue A...
  • Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.

  • Page 3: Revision Record

    Revision Record Issue Date Remarks Dec 2021 First Issue...

  • Page 5: Kit Contents

    MX915 PIN Pad Mount - SP1 This publication provides procedure for installing the 7358-K404 MX915 PIN Pad Mount - SP1 to the NCR FastLane SelfServ™ Checkout (7358) R6L Plus. Note: The PIN Pad Mount Adapter and PIN Pad device are not included in the 7358- K404 MX915 PIN Pad Mount - SP1 Kit.

  • Page 6: Required Tools

    MX915 PIN Pad Mount - SP1 Required Tools The following tools are required for removing and installing the 7358-K404 MX915 PIN Pad Mount - SP1. • Phillips Screwdriver #2 • #8–32 Nut Driver Note: Use a magnetized screwdriver to easily handle the screws.

  • Page 7: Installation Procedure

    MX915 PIN Pad Mount - SP1 Installation Procedure To install the 7358-K404 MX915 PIN Pad Mount - SP1 to the NCR FastLane SelfServ™ Checkout (7358) R6L Plus unit, follow these steps: 1. Turn off the NCR SelfServ Checkout software and hardware systems.
  • Page 8 MX915 PIN Pad Mount - SP1 Opening Tower Cabinet To open the Tower Cabinet, follow these steps: 1. Insert the key into the door latch lock and turn key counterclockwise. 2. Remove the key and then press the keylock to unlatch the door. Caution: Ensure that the door is pushed down while lock is pressed because the door will automatically open.
  • Page 9 MX915 PIN Pad Mount - SP1 3. Raise the Tower Cabinet door.
  • Page 10 MX915 PIN Pad Mount - SP1 Removing Existing PIN Pad Mount Assembly To remove the existing 7358-K404 MX915 PIN Pad Mount - SP1 from the NCR FastLane SelfServ™ Checkout (7358) R6L Plus unit, follow these steps: 1. Turn off the NCR SelfServ Checkout software and hardware systems.

Table of Contents