Page 2
NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
Page 3
Revision Record Issue Date Remarks Dec 2017 First issue.
Page 4
Walmart R6/R6L Scan & Go Labels (Bulk) This kit contains Walmart R6/R6L Scan & Go Label decals and provides instructions on how to apply the decals on a 7360 (R6) Lane Light that is installed in an R6 Lite (R6L) unit.
Page 5
7350-K177/K178 Walmart R6/R6L Scan & Go Labels (Bulk) Installation Procedure To apply the Walmart R6/R6L Light Scan & Go decals, do the following: 1. Wipe any dust or dirt on the surface of both sides of the Lane Light. 2. Carefully peel off the backing layer from each decal as shown in the image below.
Page 6
7350-K177/K178 Walmart R6/R6L Scan & Go Labels (Bulk) 3. Apply a decal on each side of the Lane Light toward the edge of the panel as shown in the image below.
Need help?
Do you have a question about the 7350-K177 and is the answer not in the manual?
Questions and answers