User Mode 2 (Date And Time Setting) "U2 - Xerox 721 Operator's Manual

User Mode 2 (Date and Time setting) "U2"

Menu
Press [Menu] twice
Menu
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL
Enter User Mode 2 to set the correct date and time.
Note: Although there will be no performance problems if the date
and time are incorrect, the printer automatically records the date
and time errors occur. This information can be critical for service
problem solving. It is recommended the date and time be set
correctly.
1. To enter User Mode 2:
Press the [Menu] Key twice when the printer is in the Standby
(idle) Mode.
Enter Online
The [Menu] Key lights green and the Status Display indicates "U2."
flashing on the left side of the display.
2. Press the [ <-- ] Key.
Enter Online
C6 appears in the left side of the display and the scrolling seconds
time is displayed in the right side of the display. The seconds can
now be changed.
3. To change the seconds, press [Enter].
The seconds stop scrolling and begin to flash.
4. To change the value, press the [ --> ] Key to increase the
5. Press [Enter] to store the value.
There are 6 setting locations: C6 - seconds, C5 - minutes, C4 -
hour, C3 - day, C2 - month, C1 - year, in sequence with each
press of the [ <-- ] Key.
value and [ <-- ] Key to decrease the value.
USER MODES
51