Media; Adding Media Rolls - Xerox 721 Operator's Manual

Adding Media Rolls

Media Empty Indicator
Wire-Clean
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL
4.
This chapter provides the following information:
•
•
•
For information about the media sizes and types that the printer
can accommodate, refer to the "Specification" chapter of this
manual.
When roll media in use is empty, the Media Empty Indicator on the
Operation Panel remains on steady.
To load a new roll media, follow the instructions in the "Loading
The Roll Media" sections of this chapter.
NOTE: Roll sizes 880 mm, 891 mm and 900 mm can be loaded in Media
Drawer 1 only. The printer is set for 900 mm size. To enable
880 mm or 891 mm sizes, contact XEROX Service.
NOTE: B3 media should not be loaded in drawer 1. If B3 media is loaded
in drawer 1, the printer will report the size as either A3 or 11"

media.

Paper Deck
MF
1 2 3 4
D1
D2
Exp-Clean
Cut
Select
D3
The procedure for loading roll media into the media drawers
The procedure for bypassing the media drawers and manually
feeding pre-cut sheets into the printer
An explanation of the dehumidifier feature.
Exit
PF
Copy Density
D4
Media
Menu Enter Online
17