Clearing Media Jam (J-11 & J-12) - Xerox 721 Operator's Manual

Clearing Media Jam (J-11 & J-12)
Fuser
Handle
Cutter
handle
Inner Transport handle
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL
When a jam J-11 occurs, the media jams on the Inner Transport
Assembly.
MF
D1
D2
D3
When a jam J-12 occurs, the media jams underneath the Drum.
MF
D1
D2
D3
1. Open the Right Side Door and turn the Inner Transport
Assembly handle to release the transport. Lower and lock the
transport by engaging the Down Lock.
2. If the media is not cut and the leading edge of the media has
reached the Drum or beyond the Drum, rotate the Cutter
handle to cut the media. Continue rotating the cutter handle
so that the green home position indicator appears in the cut
out.
3. Open the Manual Bypass Shelf, Drawer 1 and Drawer 2 in
Down Lock
order to clear the jammed media.
4. If the leading edge of the media has reached the Fuser Unit,
open the Exit Cover and remove the jammed media by rotating
the Fuser Handle.
5. Release the Down Lock while holding the handle of Inner
Transport Assembly and lift it up gently until it stops. Then
twist the handle to the left to move the transport to the home
position. Finally, turn the handle to the right to lock the
transport.
6. Rewind the jammed roll until the lead edge of the media
comes free of the feed rollers.
Exit
PF
Copy Density
D4
Exit
PF
Copy Density
D4
PROBLEM SOLVING
Menu Enter
Menu Enter
Online
Online
41