Other Supplies; Fuser Lubricant - Xerox 4850 Installation Planning Manual

SUPPLIES

Other supplies

Dry ink

Fuser lubricant

Developer
A-6
This section describes the supplies other than paper that are
necessary for installation and afterward. Your sales representative
will help you place your initial supply order.
Dry ink (also called toner) is the black powder which forms the image
on the printed page. There are three cartridges of dry ink in each
carton. You should keep at least one extra cartridge on hand at all
times. The disposable cartridges are easily changed with no mess.
The consumption rate of Xerox dry ink is approximately one cartridge
per 30,000 pages. Use only dry ink that is specified for use in the
4850 or 4890 printer, as described in the consumable supplies table.
Fuser lubricant is a consumable item required by the printer. You
should keep at least two boxes (each box contains two tubes) on
hand for installation by the service representative. The consumption
rate of Xerox fuser lubricant is approximately one tube per 120,000
pages. For product information, refer to the consumable supplies
table in this appendix.
Developer is not consumed by the printer but does have an effective
life of approximately 300,000 pages per bottle, guaranteed by Xerox.
Developer is a required item and must be kept on hand.
Use only the developer specified for use in your 4850 or 4890 printer.
For colored inks, use the color developer specified for each color in
the table below:
Table A-2. Developers for use with colored inks
Ink color Use developer
Black Black
Blue Blue
Brown Consult your Xerox representative.
Cardinal Red
Cyan Cyan
Green Green
Magenta Magenta
Red Red
Royal Blue
Ruby Magenta
Violet Magenta
XEROX DOCUPRINT 4850/4890 IPS INSTALLATION PLANNING GUIDE
Part number
502S63250
502S63252
502S63251
502S63992
502S63253
502S63993
502S6325
502S63252
502S63993
502S63993