Paper Care - Xerox 4850 Installation Planning Manual

Paper care

XEROX DOCUPRINT 4850/4890 IPS INSTALLATION PLANNING GUIDE
Once you have purchased your paper, you must be sure it is stored
and conditioned properly, so that it performs optimally in the printer
with a minimum of jams.
Storing paper Paper has a tendency to curl under the heat that is present inside
xerographic equipment. To minimize the amount of curling, use
paper with low moisture content. Paper with excessive moisture
content has a tendency to jam because of the greater curl. The
maximum recommended moisture content is 5.7 percent.
Keep these points in mind when preparing your paper storage area:
•
Store paper in its own wrapper; do not leave it unwrapped or
where it can be damaged by dampness or heat.
•
Store paper on a flat surface and not on its side or edge.
•
Store reams of paper in a closed cabinet.
•
Always store paper in a cool, dry area. Store on pallets or
shelves, not on the floor.
•
Plan ahead and keep at least a day's supply of paper in the
same area as the printer to allow environmental stabilization
prior to printing.
For more detailed information on paper for Xerox printers, refer to
Helpful Facts about Paper, provided with your printer.
Figure A-1. Storing paper correctly
SUPPLIES
A-3