Loading Paper In Trays 3 And 4 - Xerox 4595 Getting Started

Copier/printer
Hide thumbs Also See for 4595:
Table of Contents

Advertisement

Loading paper in Trays 3 and 4

X e r o x 4 5 9 5 C o p i e r / P r i n t e r G e t t i n g Sta r t e d
Use the following procedure for loading paper in trays 3 and 4.
NOTE: When the machine runs out of paper during a copy or print
job, the Control Panel displays a message. Follow the instructions
on the Control Panel for adding paper to the appropriate tray or
trays. The copy or print job automatically resumes once paper is
added.
1. Slowly pull out the tray until it stops.
2. Remove any paper from the tray.
3. Expand the two paper guide levers to the desired paper size.
4. Load and align the edge of the paper against the left edge of
the tray with the side to be copied or printed on facing down.
5. Move the two paper guide levers until they just touch the
edges of the paper.
a. Ensure that the paper guides fit correctly into the slots on
the tray and release the levers.
3. Loa din g Pa per
3-3

Advertisement

Table of Contents
loading

Table of Contents