Loading Paper In Trays 1 And 2 - Xerox 4595 Getting Started

3 . L o a d i n g P a p e r

Loading paper in Trays 1 and 2

3 - 2
Use the following procedure for loading paper in trays 1 and 2.
NOTE: When the machine runs out of paper during a copy or print
job, the Control Panel displays a message. Follow the instructions
on the Control Panel for adding paper to the appropriate tray or
trays. The copy or print job automatically resumes once paper is
added.
1. Slowly pull out the tray until it stops.
2. Load and align the edge of the paper against the left edge of
the tray with the side to be copied or printed on facing down.
KEY POINT: Do not load paper above the MAX line.
3. Gently push the tray in until it stops.
X e r o x 4 5 9 5 C o p i e r / P r i n t e r G e t t i n g Sta r t e d