Ingeteam INGECON SUN 3TL Installation And Operation Manual page 24

Ingeteam
1. Mount the plate on the wall, using a level to ensure it is horizontally aligned, and mark the holes.
INGECON SUN 3TL
INGECON SUN 3TL
To secure the INGECON SUN 6TL M2 inverter, select one of the upper pairs of holes (A or B), in addition to the
lower hole C.
2. Drill holes in the wall with a suitable bit for the screws to be used to secure the inverter to the wall later.
The diameter of the holes in the plate and inverter is 8 mm.
24
INGECON SUN 6TL M2
INGECON SUN 6TL M2
ACL2011IQM01_ - Installation and Operation Manual
Installing the unit