Table of Contents
Advertisement
Load the print material in the Automatic
Paper Feeder. Ensure that the right edge
of the media is in contact with the right
side of the Automatic Paper Feeder. Do
not exceed the rated capacity. Do not mix
different types of print media.
Load paper or transparencies with the
print side facing you.
Load letterhead paper with the design
side face-up. The top edge of the sheet
with the logo should enter the printer
first.
While squeezing the tab on the Paper
Guide, move the guide to the right. Slide
the paper guide until it lightly touches the
side of the stack of print media. Do not
press the paper guide too tightly to the
edge of the print media; the guide may
bend the media or provide too much
resistance when feeding.
L O A D I N G P A P E R
4
5
Note: When you print a file from your PC
using the Automatic Paper Feeder, make
sure that you select the source and the
correct paper size from your software
application before starting your print job.
1.25
U s e r G u i d e
1
Advertisement
Table of Contents
