Table of Contents
Advertisement
S Y S T E M D A T A O P T I O N S
O p t i o n
D e s c r i p t i o n
DISCARD SIZE
When receiving a document as long or longer than the paper
installed in your machine, you can set the fax machine to discard
any excess at the bottom of the page. If the received page is outside
the margin you set, it will print on two sheets of paper at the actual
size.
If the document is within the margin, and the Auto Reduction
feature is turned ON, it will be reduced to fit into the appropriate
size paper (Discard does occur). If the Auto Reduction feature is
turned OFF or fails, the data within the margin will be discarded.
Settings range from 0 to 30 mm.
REDIAL INTERVAL
The XK50cx can automatically redial a remote fax machine if it
was busy. Intervals from 1 to 15 minutes can be entered.
REDIALS
Specifies the number of redial attempts (from 0 to 9) the XK50cx
will attempt.
ANSWER ON RINGS
Specifies the number of times the XK50cx rings (1 - 7) before
answering an incoming call.
SEND FROM MEMORY
When enabled, all fax transmission documents are automatically
scanned into memory. It will not be necessary to wait until
documents in the Automatic Document Feeder are sent before you
can send or store other fax jobs.
LOCAL ID
When enabled, the XK50cx automatically prints the page number
and date and time of reception at the bottom of each page of a
received document.
CONT POLL REPORT
You can configure your WorkCentre XK50cx to automatically poll
and retrieve faxes from unattended fax machines. When enabled, a
multi-communication report is printed every time continuous
polling ends. The report will contain the results for each registered
station. Set to ON or OFF.
1.12
U s e r G u i d e
Advertisement
Table of Contents
