Nexcom DNA 1170 Series User Manual page 48

Chapter 4: BIOS Setup
Serial Port Console Redirection
This section is used to configure the serial port that will be used for console
redirection.
Console Redirection
Enable or disable the console redirection.
Console Redirection (Serial Port for Out-of-Band Management)
When the Console Redirection is enabled, the Console Redirection Settings
will be available. Press <Enter> for additional configuration options.
Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved.
Console Redirection Settings
Terminal Type
ANSI Extended ASCII character set.
VT100 ASCII character set.
VT100+ Extends VT100 to support color, function keys, etc.
VT-UTF8 Uses UTF8 encoding to map Unicode characters onto 1 or more
bytes.
Bits Per Second
Select the serial port transmission speed. The speed must match the other
side. Long or noisy lines may require a lower speed.
Data Bits
The options are 7 and 8.
40
DNA 1170 Series User Manual