Table of Contents
Advertisement
EN
4 Operating your pressure washer
4.1
Connection of high
pressure hose
4.2 Mounting of spray lance,
nozzles and foam
sprayer
4.3
Water connection
6
An ordinary 1/2" garden hose of
min. 5 m and max. 25 m will be
suitable.
NOTE: Connection to the public
mains according to regulations.
1. Mount the high pressure
hose on the outlet (3).
1. Push the spray lance (6) into
the spray gun (7) and screw
it on.
2. Attach the nozzle.
IMPORTANT! Only use wa-
ter without any impurities. If
there is a risk of running sands
in the inlet water (i.e. from your
own well), an additional fi lter
should be mounted.
1. Let the water run through
the water hose before con-
necting it to the machine to
prevent sand and dirt from
penetrating the machine.
Note: Check that the fi lter is
fi tted in the water inlet pipe
and that it is not clogged up.
2. Connect the water hose to
the water supply by means
of the quick connector (inlet
water, max. pressure: 10 bar,
max. temperature: 60°C).
3. Turn on the water.
Advertisement
Table of Contents
