Contents Introduction ..............3 Safety precautions and working techniques ....3 Before you start using your high pressure washer ..7 Operating your high pressure washer ......8 After using the pressure washer ......... 9 Maintenance ............. 10 Troubleshooting ............10 Warranty Conditions ..........
Page 8
rance association, social security institutions, occupational safety and health authorities or other organizations. Accessories and spare parts • To ensure the machine safety only use original spare parts from Nilfi sk or approved by Nil- fi sk. • High pressure hoses, fi ttings and couplings are important for the safety of the machine. Only use hoses, fi...
Page 9
• It is recommended that the electrical supply to the machine should include a residual current device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms. • Inadequate extension cables can be dangerous. If an extension cable is used, it shall be suitable for outdoor use, and the connection has to be kept dry and off the ground •...
Page 10
After fi nishing the work WARNING! • Always switch off the machine and unplug the power plug from the socket after work and when leaving the machine unattended. • Disconnect water inlet hose between machine and water supply. • Wind up electrical cable and high pressure hose – to avoid damage of cable, plug, high pressure hose and fi...
20. Wheel caps 3.1 Mounting of trolley handle and wheels Mounting of trolley handle Only applicable for models with trolley handle and wheels (C 100.6-6, C 110.4, C 110.4 X-TRA and C 120.6 X-TRA) Place the trolley handle (15) on the machine.
4 Operating your high pressure washer See the pictorial quick reference guide – operating your high pressure washer. 4.1 Connection of high pressure hose Attach the high pressure hose (4) to the spray handle (7). Detach the high pressure hose by pressing the pawl (A).
When connecting the machine to operate from pressure less water supplies – always use ad- ditional fi ltering to secure that impurities are not sucked in. Hose length should be max. 3 meter and of minimum ½". To meet these requirements, Nilfi sk recommends that you use the original Nilfi sk suction hose kit.
6 Maintenance See the pictorial quick reference guide - maintenance. To ensure a long and problem free working life of the high pressure washer, please take the following advices: • Wash out water hose, high pressure hose, spray lance and accessory before mounting •...
Symptom Cause Recommended action Machine stops Fuse has blown Replace fuse. Switch off other machines. Incorrect mains voltage Check that the mains voltage corresponds to specifi cation on the model tag. Thermal sensor activated Leave the washer for 5 minutes to cool down.
ISO 3744 Guaranteed sound power level L WA in dB(A) accordance with 2000/14/EC We reserve the right to make alterations. * C 100.6-6, ** C 110.4 X-TRA 10 Declaration of Conformity Declaration of Conformity Product: High Pressure Washer Type: Nilfi...
Page 17
HOLLAND RUSSIA Нилфиск-Эдванс Nilfi sk-Advance 127015 Москва Versterkerstraat 5 Вятская ул. 27, стр. 7 1322 AN Almere Россия Tel.: +31 365 460 700 Tel.: +7 495 783 9602 Web: http://www.nilfi sk.com E-mail: info.nl.@nilfi sk.com Web: http://www.nilfi sk.nl E-mail: info@nilfi sk.ru Web: http://www.nilfi...
Need help?
Do you have a question about the C 100.6 and is the answer not in the manual?
Questions and answers