Before You Start Using Your High Pressure Washer; Mounting Of Trolley Handle, Hose Hook And Hose Reel; Mounting Of Quick Coupling; Telescopic Handle - Nilfisk-Advance E 130.3 User Manual

3 Before you start using your high pressure washer

EN
A
DA
NO
Operation elements
SV
FI
DE
FR
10. Foam sprayer
11. Nozzle cleaning tool
12. Hose reel (not standard)
NL
13. Model tag
14. Trolley handle (telescopic handle)
IT
15. Hose hook
16. Hexagon key for handle and bracket mounting
17. Button for telescopic handle
ES
18. Turnable cable hook
19. Quick coupling
PT

3.1 Mounting of trolley handle, hose hook and hose reel

EL
TR
CS
HU
PL

3.2 Mounting of quick coupling

HR
SL

SK
LV

3.3 Telescopic handle

LT
ET
RU
ZH
10
See the pictorial quick reference guide – unpacking.
Illustration shows the operation elements and how to prepare your machine for use.
1. Start/stop switch
2. Water inlet with fi lter
3. High pressure connection (models without hose reel)
4. High pressure hose
5. Electric cable
6. Click&Clean spray lance
7. Spray handle with lock (7a)
8. Click&Clean Tornado PR nozzle
9. Click&Clean Powerspeed nozzle
Mounting of trolley handle and hose hook (standard models)
A1
Push down the trolley handle (14) over the two metal tubes. Make sure that the handle
is mounted as illustrated. Mount screws with nuts (make sure that the screws go through
handle as well as tube).
A2
Mount the hose hook (15) on the handle (2 screws).
Mounting of hose reel handle (models with hose reel)
A3
Click the hose reel handle on to the trolley handle (no screws).
A4
When mounting the quick coupling for the fi rst time, check that the factory fi tted fi lter is
positioned in the water inlet pipe.
A5
Screw the quick coupling tight on to the water inlet (2).
The inlet fi lter must always be fi tted in the water inlet pipe to fi lter out sand, lime stone and other
impurities as these will damage the pump valves. The fi lter is factory fi tted.
If the fi lter is removed this will invalidate the guarantee.
A6
The machine features a tele scopic handle. To raise or lower the handle, press the button
(17) and move the handle upwards or downwards. When a click is heard, the handle is in
right position.
IMPORTANT!
Original Instructions