Advertisement
Operation (continued)
WARM/COOL WEATHER OPERATING
INSTRUCTIONS
Speed settings for warm or cool weather depend on factors such
as the room size, ceiling height, numbers of fans.
NOTE: The fan reverse buttons must be pressed while the
fan is running.
Warm weather - (Counterclockwise Direction) A downward air
ow creates a cooling effect. This allows you to set your air
conditioner on a warmer setting without affecting your comfort.
Cool weather - (Clockwise Direction) An upward air ow moves
warm air off the ceiling. This allows you to set your heating unit
on a cooler setting without affecting your comfort.
Care and Cleaning
Do
Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. Because of the fan's
natural movement, some connections may become loose over time. It is not necessary to remove the fan from the ceiling.
Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the nish. The plating is sealed with a lacquer to
minimize discoloration or tarnishing.
(Optional) Apply a light coat of furniture polish to the wood blades.
(Optional) Cover small scratches with a light application of shoe polish.
Do not
Use water when cleaning. Water could damage the motor, or the wood, or possibly cause an electrical shock.
Apply oil to your fan or motor. The motor has permanently-lubricated sealed ball bearings.
16
- Quick Links:
- Installation
- Assembly
- Operation
- Troubleshooting
Hide quick links:
Advertisement
Need help?
Do you have a question about the CELENE and is the answer not in the manual?
Questions and answers
why won't the light turn on
The CELENE ceiling fan light may not turn on due to several possible reasons:
1. Power Supply Issue – Ensure the fan is properly connected to a working power source.
2. Remote Control Battery – Check if the remote control has working AAA batteries.
3. LED Light Kit Connection – Verify that the 20-watt LED light kit is properly installed and connected.
4. Receiver Issue – Ensure the receiver is correctly installed and functioning.
5. Extension Cord Connection – Make sure the 2-pin or 3-pin extension cord is securely connected.
6. Timer Setting – If the timer function is active, it may have turned the light off automatically.
7. Faulty Components – If all connections are correct but the light still does not work, the LED light kit or receiver may be defective.
For further assistance, contact Home Decorators Collection Customer Service at 1-800-986-3460.
This answer is automatically generated