To Remove The Battery Pack; Using Ac Power - Sony PFV-L02 Operation Manual

To remove the battery pack

With the lever pushed in, slide the BP-L40A/L60A/
L90A out.
- A C
PFV-L02 (SY)
3-204-968-01(1)
6 (E)
Lever
BP-L40A/L60A/L90A
D C IN
U
IN
Sony Corporation
Communication System Solutions Network Company

Using AC Power

You can operate the unit from an AC power source by
using the AC-550/550CE AC Adaptor or AC-DN2A
AC Adaptor.
To use the AC-550/550CE
Connect the AC-550/550CE to the AC, as shown
below, and set the POWER switch of the AC-550/
550CE to ON.
AC power cord
(supplied with the
POWER switch: ON
AC-550/550CE)
DC OUT
DC power cord
(supplied with the AC-550/550CE)
To use the AC-DN2A
Attach the AC-DN2A on the top of this unit and
connect the AC power cord to an AC power source.
Use the same method that you use to attach the BP-L40A/
L60A/L90A. For details, refer to "To attach the battery
pack" on the previous page.
PFV-L02
DC IN
U
-AC IN
DC IN
Printed in Japan
2000.07.13
© 2000