System Setup - Xerox WorkCentre 6505N User Manual

System Setup

Use this menu to configure general operation settings of the printer. For example, time to Energy Saver
mode, alarm settings, and so on.
Item Description
Power Saver Specifies the transitional time of Power Saver Modes 1 and 2 in increments of 1 minute.
Timer
•
•
For details, see
Power Saver Wake Turns on or off the Off Hook Wake Up.
Up
Specifies the time the printer waits for further control panel input before resetting the
Auto Reset
Copy, Scan, or Fax settings and returning to standby mode.
•
•
•
•
•
Fault Time-out You can cancel a printing process when it goes beyond a set time period. Set the time
until the print job is canceled:
•
•
Time-Out You can cancel a printing process when it goes beyond a set time period. Set the time
until the print job is canceled:
•
•
Clock Settings Specifies the date and time, and the format of the settings:
•
•
•
Mode 1 (Printer): 5–60 min. The default setting is 30 minutes.
Mode 2 (System): 5–120 min. The default setting is 5 minutes.
Energy Saver Mode
45sec
1min
2min
3min
4min
3 sec. to 300 sec.: Specifies the amount of time in increments of 1 second the printer
waits for additional data before it cancels the job. The default setting is 60 sec.
Off: Cannot cancel.
5 sec. to 300 sec.: Specifies the amount of time in increments of 1 second the printer
waits for additional data before it cancels the job. The default setting is 30 sec.
Off: Cannot cancel.
Set Date & Time.
Date Format: Select yy/mm/dd, mm/dd/yy, or dd/mm/yy.
Time Format: Select 12H or 24H format.
on page 23.
WorkCentre 6505 Color Laser Multifunction Printer
Control Panel Menus
157
User Guide