Xerox WorkCentre 6505N User Manual page 201

• If zero (0) is the value closest to the middle of the white band, you do not need to adjust that
color.
• If zero (0) is not the value closest to the middle of the white band, record the number that is
closest to the center of the white band.
3. If it is necessary to make any horizontal or vertical adjustments, proceed to
Registration Values
Entering Color Registration Values
Using the control panel, enter the values that you found on the Color Registration Correction Chart to
make adjustments:
1. On the control panel, press the System button.
2. Press the Up Arrow or Down Arrow button to select Admin Menu, then press the OK button.
3. Press the Up Arrow or Down Arrow button to select Maintenance, then press OK.
4. Press the Up Arrow or Down Arrow button to select Adjust Color Regi, then press OK.
Press the Up Arrow or Down Arrow button to select Enter Number, then press OK.
5.
6. Adjust the Left Horizontal registration values:
a. Press the Up Arrow or Down Arrow button to select the LY value from the Color Registration
Correction Chart. Press the Forward Arrow button to adjust the next value.
b. Press the Up Arrow or Down Arrow button to select the LM value from the Color Registration
Correction Chart. Press the Forward Arrow button to adjust the next value.
c. Press the Up Arrow or Down Arrow button to select the LC value from the Color Registration
Correction Chart. Press OK to move to the next screen.
7. Adjust the Right Horizontal registration values:
Press the Up Arrow or Down Arrow button to select the RY value from the Color Registration
a.
Correction Chart. Press the Forward Arrow button to adjust the next value.
b. Press the Up Arrow or Down Arrow button to select the RM value from the Color Registration
Correction Chart. Press the Forward Arrow button to adjust the next value.
Press the Up Arrow or Down Arrow button to select the RC value from the Color Registration
c.
Correction Chart. Press OK to move to the next screen.
8. Adjust the Process Vertical registration values:
a. Press the Up Arrow or Down Arrow button to select the PY value from the Color Registration
Correction Chart. Press the Forward Arrow button to adjust the next value.
b. Press the Up Arrow or Down Arrow button to select the PM value from the Color Registration
Correction Chart. Press the Forward Arrow button to adjust the next value.
c. Press the Up Arrow or Down Arrow button to select the PC value from the Color Registration
Correction Chart.
9. When the registration value adjustments are complete, press OK.
10. Print the chart again to check the values:
a. Press the Up Arrow or Down Arrow button to select Color Regi Char, then press OK.
b. Press the Up Arrow or Down Arrow button to select Yes, then press OK.
Note: For details, see
on page 201.
Printing the Color Registration Correction Chart
WorkCentre 6505 Color Laser Multifunction Printer
Troubleshooting
Entering Color
on page 200.
User Guide
201