Loading Paper; Loading Paper In Tray 1 - Xerox WorkCentre 6505N User Manual

Loading Paper

This section includes:
•

Loading Paper in Tray 1

• Loading Paper in the Manual Feed Slot
• Loading Paper in the 250-Sheet Feeder (Tray 2)
Loading Paper in Tray 1
You can use Tray 1 for a wide variety of media, including:
• Plain Paper
• Lightweight Cardstock
• Heavyweight Cardstock
• Letterhead
• Labels
• Envelopes
• Lightweight Glossy Cardstock
• Heavyweight Glossy Cardstock
• Hole Punched
• Colored Paper
• Pre-printed Paper (paper already printed on one side)
• Custom Size Paper
For a complete list of paper types and sizes usable in Tray 1, see
Follow these guidelines when loading paper into Tray 1:
• Load up to 250 sheets of plain paper, or a stack of paper (65–220 g/m
Cover) less than 15 mm high (0.60 in.).
• Tray 1 holds paper within the following dimensions:
• Width: 76.2–216 mm (3–8.5 in.)
• Length:127–355.6 mm (5–14 in.)
• For automatic 2-sided printing, you can load paper in the range of 60–105
Bond).
• Do not load different types of paper in the same tray at the same time.
• To print high quality, use high-quality paper intended for laser printers.
• Do not remove or add paper to Tray 1 during printing. Doing so could cause a paper jam. Remove
the paper, align it with the new paper and insert both into the tray together.
• Do not put any objects other than paper in Tray 1.
• Do not push or force down Tray 1.
• Always load paper for short edge feed.
For more paper usage guidelines, see
on page 61
on page 63
Supported Paper and Media
WorkCentre 6505 Color Laser Multifunction Printer
on page 65
Supported Paper
2
on page 56.
Printing
on page 58.
, 17–40 lb. Bond, 40–80 lb.
2
(16–28 lb.
g/m
User Guide
61