Xerox WorkCentre 7132 User Manual page 66

5 Operation on Macintosh Computers
Stapling - Specifies the stapling location and number of staples. This option requires
the optional finisher unit.
Offset - The position of individual jobs or sets of copies are shifted to either side of the
output tray to enable easy separation.
Feed Orientation - Specifies the paper orientation when printing from the bypass tray.
When feeding the short edge of the paper first, select [Landscape]. When feeding the
long edge of the paper, select [Portrait].
Front Cover - Specifies the paper tray that the front cover stock is to be fed from.
Back Cover - Specifies the paper tray that the back cover stock is to be fed from.
Print Mixed Sized Originals - Specifies whether you are printing mixed sized originals
for 2 Sided Print.
Image Enhancement - Specifies whether to use the Image Enhancement function.
Selecting [On] smoothes out boundaries when printing. This reduces jagged edges by
artificially increasing the resolution of the image. When printing a bitmapped image
composed of coarse halftone dots, smooth color gradation is impossible in certain
situations. In this case, select [Off].
Gray Guaranteed - Specifies printing non-raster image areas in black toner only.
Draft Mode - Specifies whether to reduce the amount of toner used when printing
drafts. When [On] is selected, the overall printed color becomes lighter. This is best for
printing documents when high print quality is not necessary.
Substitute Tray - Specifies what action to take when the paper for the print size is not
loaded in the machine.
Use Printer Settings - Use the printer settings. The settings can be confirmed on
the control panel.
Display Message - Display paper supply messages on the control panel. Printing
is impossible until paper is supplied.
Use Closest Size (Adjust to Fit) - Selects the closest paper size and automatically
adjusts the image size as necessary.
Use Closest Size (No Zoom) - Selects the closest paper size and prints the same
size as the image.
Use Larger Size (Adjust to Fit) - Selects paper larger than the original and
automatically adjusts the image size as necessary.
Use Larger Size (No Zoom) - Selects paper larger than the original and prints the
same size as the image.
Select Tray 5 (Bypass) - Feeds from bypass tray.
Skip Blank Pages - Specifies whether to skip blank pages when printing documents
containing blank pages.
Custom Paper Auto Orientation - Specifies whether to correct the orientation of the
custom paper.
Transparency Separators - Specifies the separators to be inserted between
transparencies.
66 Xerox WorkCentre 7132 PostScript® User Guide