Configuration Tab Settings; Settings - Xerox WorkCentre 7132 User Manual

2 Operation with Windows 95/98/Me

Configuration Tab Settings

This section describes the settings of the Configuration tab.
Select the function that you want to set in the Features List and change the settings in
the Change box below.
NOTE: You can restore defaults by clicking [Defaults].
NOTE: The settings that can be selected vary depending on which options have been
installed. Change these settings only after confirming that the option settings are
complete. See Options Tab Settings on page 14.

Settings

Collated - Selects whether to collate a printed sets from a multiple-page file.
Stapling - Specifies whether to staple printed documents and the position of the staple.
You can staple 2 to 50 sheets of 80 g/m
NOTE: You cannot use staples when anything other than Finisher Tray is selected for
Output bin in the Paper tab.
Offset - The position of individual jobs or sets of copies are shifted to either side of the
output tray to enable easy separation.
Feed Orientation - Specifies the paper orientation when printing from the bypass tray.
When feeding the short edge of the paper first, select [Landscape]. When feeding the
long edge of the paper, select [Portrait].
Front Cover - Specifies the paper tray that the front cover stock is to be fed from.
12
2
or lighter paper.
Xerox WorkCentre 7132 PostScript® User Guide