Xerox WorkCentre 7132 User Manual page 54

5 Operation on Macintosh Computers
(2) Select your printer model in the list, then click [Select].
The PPD file for this machine is set.
5.
Click [Configure] to set the installable options.
See Installable Options on page 57 for details about the options.
NOTE: You can change the print settings after you install the printer driver.
NOTE: To use the options, it is necessary to set Configure. Always set this according
to the configuration of your machine.
6.
Click [OK]. Click [OK] once more in the screen displayed.
7.
Close the Chooser.
54 Xerox WorkCentre 7132 PostScript® User Guide