Settings - Xerox WorkCentre 7132 User Manual

5 Operation on Macintosh Computers
3.
Specify the functions that you want to set.

Settings

Collated - Specifies whether to collate a multiple-page file when a job is printed.
Paper Type - Specifies the paper type for printing.
Output Destination - Specifies the output tray.
Output Color - Specifies printing in full color mode or black and white mode.
Stapling - Specifies the stapling location and number of staples. This option requires
the optional finisher unit.
Offset - The position of individual jobs or sets of copies are shifted to either side of the
output tray to enable easy separation.
Feed Orientation - Specifies the paper orientation when printing from the bypass tray.
When feeding the short edge of the paper first, select [Landscape]. When feeding the
long edge of the paper, select [Portrait].
Front Cover - Specifies the paper tray that the front cover stock is to be fed from.
Back Cover - Specifies the paper tray that the back cover stock is to be fed from.
Print on Separators - Specifies whether to print on the transparency separators as
well as the transparency.
Feed Separators from - Specifies the paper tray that transparency separators are to
be fed from. When [Auto] is selected, the tray set on the machine is used as the feed
destination.
Paper Type (Separators) - Specifies a paper type for the transparency divider.
Print Mixed Sized Originals - Specifies whether you are printing mixed sized originals
for 2 Sided Print.
Image Enhancement - Specifies whether to use the Image Enhancement function.
Selecting [On] smoothes out boundaries when printing. This reduces jagged edges by
artificially increasing the resolution of the image. When printing a bitmapped image
composed of coarse halftone dots, smooth color gradation is impossible in certain
situations. In this case, select [Off].
Gray Guaranteed - Specifies printing non-raster image areas in black toner only.
60 Xerox WorkCentre 7132 PostScript® User Guide