Layout Tab Settings; Settings; How To Use Help - Xerox WorkCentre 7132 User Manual

Layout Tab Settings

This section describes the settings in the Layout tab.
NOTE: You can restore defaults by clicking [Defaults].

Settings

Multiple-Up - Prints multiple consecutive pages of a document on a single sheet of
paper.
Draw Outlines - Draws a border around each page image printed on a single sheet
of paper using the Multiple-Up feature.
Fit to New Paper Size - Specifies the paper size on which to print the image.
Image Shift - Specifies the image shift position for a binding margin. Specify the edge
position and the extent of the image shift on [Side 1] of the paper. You can also specify
a margin for [Side 2] for 2 sided printing along the same edge of the paper.

How to Use Help

The following describes how to use Help.
1.
Click
which you need explanations, opening a pop-up window that contains relevant
information. Click inside the pop-up window to close it.
2.
Click [Help], an explanation of the current tab appears as Help information.
Xerox WorkCentre 7132 PostScript® User Guide
4 Operation with Windows 2000, Windows XP and Windows Server 2003
and a ? mark appears next to the pointer. You can then click items for
49