Xerox 5750 Getting Started Manual page 46

Getting Started Guide
4. Do not specify a password in the password field. Click OK. You are now in
Administrator mode.
5. Pull down the Administration menu, and select Configure, then Password, as shown
in Figure 33.
The Change Password dialog box, shown in Figure 34, appears.
6. Since the old password is blank, leave this field empty. Enter the new password in the
New Password field.
7. Re-enter the new password in the Verify field and click OK.
If the passwords entered in the New Password and Verify fields do not match, the
error message "The new passwords don't match" appears. You probably made a typing
mistake. Repeat steps 6 and 7.
If the passwords do match, the message "Password accepted" appears.
8. Click OK and close the Viewer.
page-46
Figure 33: Configure Password
Figure 34: Change Password Dialog Box
0015647-0001 February 18, 1999