Xerox 5750 Getting Started Manual page 20

Getting Started Guide
10. To configure all of the Installable options:
a. Select the Xerox 5750/Acolor 620 Support option from the Installable options list.
This option enables/disables 12in x 18in, Postcard, and Tray 4 support. This
option also disables/enables Group in Sorter and Group in Sorter Reverse, which
are not supported by the Xerox 5750/Acolor 620 copier. Xerox 5750/Acolor 620
Support is enabled (Yes) by default.
If your color server is connected to a Xerox 5750/Acolor 620 copier, use the
default (Yes).
If your color server is connected to a Xerox 5790/Acolor 935 or Xerox 5799/Acolor
936 copier, use the Change Setting pull-down list to set this option to No.
b. Select the Optional Sorter option from the Installable options list. This option
enables/disables the Splash M Series sorter features. This option is disabled
(Not Installed) by default.
If the copier connected to your color server has a sorter attached, use the
Change Setting pull-down list to set this option to Installed.
If the copier does not have a sorter, use the default (Not Installed.)
c. Click OK.
The installation is now complete and you can start sending print jobs to the color server. The
printer is installed with a set of default options. You can use these defaults, specify new
defaults (which will apply to all your print jobs), or select new options on a job-by-job basis.
For more information, refer to the Splash M Series User's Manual.
page-20 0015647-0001 February 18, 1999