Xerox 5750 Getting Started Manual page 3

The minimum system requirements for using the Splash M Series Color Server are:
• One of the following color copiers:
— Xerox 5750/Acolor 620
— Xerox 5790/Acolor 935
— Xerox 5799/Acolor 936
• Supported network printing protocols over EtherNet
— Windows
— EtherTalk
— Novell NetWare
— Unix compatible— LPD over TCP/IP
• Macintosh clients:
— PowerMac
— System 7.5.5 or later
— EtherNet network interface
— 8MB free RAM
— 4MB hard disk space
— 640x480 video resolution
— Open Transport 1.1.1 or above
— LaserWriter driver 8.3.4 or above
• Minimum system requirements for Windows Network clients:
— Microsoft Windows Network client software installed on the workstation
— PostScript print driver (Microsoft recommended)
— 2MB hard disk space
— Windows 95, Windows 98 or NT 3.51/4.0
— TCP/IP protocol on workstation
• Additional minimum requirements for Novell NetWare include:
— NetWare client software installed on the workstation
— PostScript print driver (Microsoft recommended)
— 2MB hard disk space
— NetWare file server running NetWare NOS version 3.11 or later
• Client system must also have application software that can produce PostScript output.
• 10baseT (twisted-pair) or 100baseT network cable.
If your network uses BNC/Thinnet media, you must use a hub that includes a BNC port to
connect the Splash M Series Color Server to the network.
0015647-0001 February 18, 1999
Networks—TCP/IP
TM
TM Phase II
TM —IPX
Getting Started Guide
:
TM
page-3