Xerox 5750 Getting Started Manual page 18

Getting Started Guide
3. Click on the Spool Settings button. The Spool Settings dialog box, shown in
Figure 10, appears.
4. Click on Print directly to printer then click OK. The Spool Setting dialog box closes,
but the Details tab (Figure 9) is still displayed.
5. On the Details tab, switch to the PostScript tab by clicking on PostScript. The
PostScript tab, shown in Figure 11, appears.
6. On the PostScript tab, click Advanced. The Advanced PostScript dialog box, shown
in Figure 12, appears.
page-18
Figure 10: Spool Settings Dialog Box
Figure 11: PostScript Tab
0015647-0001 February 18, 1999