Xerox 5750 Getting Started Manual page 12

Getting Started Guide
5. Select the printer model (Splash M210 v1.0, Splash M310 v1.0, or Splash M410 v1.0)
that matches the server model you selected in Step 4, then click Select.
6. Click on Setup. The Current Printer Description File dialog box (Figure 4) appears
when the workstation has finished setting up the printer.
7. Click on Configure. The Installable Options dialog box, shown in Figure 5, appears.
8. Follow these steps to configure all of the Installable options:
a. Select the Xerox 5750/Acolor 620 Support option from the Installable options list.
This option enables/disables 12in x 18in, Postcard, and Tray 4 support. This
option also disables/enables Group in Sorter and Group in Sorter Reverse, which
are not supported by the Xerox 5750/Acolor 620. Xerox 5750/Acolor 620 Support
is enabled (Yes) by default.
If your color server is connected to a Xerox 5750/Acolor 620 copier, use the
default (Yes).
If your color server is connected to a Xerox 5790/Acolor 935 or Xerox 5799/Acolor
936 copier, set this option to No.
page-12
Figure 4: Current Printer Description File Dialog Box
Figure 5: Installable Options Dialog Box
0015647-0001 February 18, 1999