Getting Started Guide
2. Click on Details. The Details tab, shown in Figure 23, appears.
3. Click on the Spool Settings button. The Spool Settings dialog box, shown in
Figure 24, appears.
4. Click on Print directly to printer then click OK. The Spool Setting dialog box closes,
but the Details tab (Figure 23) is still displayed.
5. On the Details tab, switch to the PostScript tab by clicking on PostScript. The
PostScript tab, shown in Figure 25, appears.
page-34
\\Splashm\Splash_print
Figure 23: Details Tab
Figure 24: Spool Settings Dialog Box
0015647-0001 February 18, 1999