Xerox 5750 Getting Started Manual page 38

Getting Started Guide
The Splash CD-ROM that shipped with the color server contains a folder named Winviewer.
This folder has all the utilities and files you need to install and setup the Viewer and printer
description files on the workstation.
The Microsoft Client for Microsoft networks and TCP/IP protocols must be installed on the
workstation in order to run the Viewer. These protocols also support printing to the Splash M
Series.
If you are installing the Viewer and printer files on a non-US English Windows NT4.0
workstation, you may optionally use the installation procedure in Section 5.6.3. This
procedure contains extra steps, but it will minimize the amount of US English that appears
in the Printer Properties dialog box on the workstation.
1. Logon to the workstation as a local administrator.
2. Insert the Splash CD-ROM that shipped with the color server into your client
workstation's CD-ROM drive.
3. Open the WINVIEWER folder on the CD-ROM.
4. Double-click on Setup. When Setup starts, a dialog box appears that prompts you to
select a language.
5. Select the English language from the pull-down list and click OK. The Install Shield
Wizard starts.
6. Install the Viewer by following the Install Shield prompts.
7. When the Viewer installation is complete, remove the CD-ROM from the workstation
CD-ROM drive.
8. Start the Add Printer Wizard by clicking on Start, Settings, Printers and Add
Printers.
9. When the Add Printer Wizard prompts for My Computer or Network Printer Server,
select Network Printer Server and click Next.
10. When the Connect to Printer dialog box appears, enter the Windows NT network
path for the Splash M Series Color Server's configured print queue. If the hostname is
splashm and the print queue name is splash_print, the Windows NT network name is
\\splashm\splash_print.
11. Click OK. If the Connect to Printer Warning box appears, click OK.
12. When the Driver Setup window appears, click on Have Disk.
Always click on Have Disk regardless of whether or not this is the first time you are adding
a printer to your workstation.
13. When the Install from Disk window appears, click Browse.
14. The Locate File dialog box appears. Select the Winnt4 folder (the default pathname is
c:\Program Files\Splash\M Series Viewer v1.0\Winnt4).
15. Open the Winnt4 folder, select Splashm.inf and click on Open.
page-38 0015647-0001 February 18, 1999