Xerox 5750 Getting Started Manual page 28

Getting Started Guide
5. Click on Auto Setup. The Current Printer Description File dialog box (Figure 18)
re-appears when the workstation has finished setting up the printer.
6. Click on Configure. The Installable Options dialog box, shown in Figure 19, appears.
7. Follow these steps to configure all of the Installable options:
a. Select the M Series Features option from the Installable Option list. Choose either
M200, M300, or M400, depending on the model of the color server you specified in
Step 4.
b. Select the Xerox 5750/Acolor 620 Support option from the Installable options list.
This option enables/disables 12in x 18in, Postcard, and Tray 4 support. This
option also disables/enables Group in Sorter and Group in Sorter Reverse, which
are not supported by the Xerox 5750/Acolor 620. Xerox 5750/Acolor 620 Support
is enabled (Yes) by default.
If your color server is connected to a Xerox 5750/Acolor 620 copier, use the
default (Yes).
If your color server is connected to a Xerox 5790/Acolor 935 or Xerox 5799/Acolor
936 copier, set this option to No.
c. Select the Optional Sorter option from the Installable options list. This option
enables/disables the Splash M Series sorter features. This option is disabled (Not
Installed) by default.
If the copier connected to your color server has a sorter attached, set this option
page-28
Figure 18: Current Printer Description File Dialog Box
Figure 19: Installable Options Dialog Box
0015647-0001 February 18, 1999